TM 5-3800-205-23-2
EJECTOR SUPPORT ROLLER MAINTENANCE - CONTINUED
0039 00
INSTALLATION - CONTINUED
6.
Remove block (5) from ejector cylinder (4). Remove nylon strap and lifting device.
7.
Install plate (2) on ejector (3) with three bolts (1).
8.
Adjust ejector support roller (Refer to Adjustment).
4
2
1
3
390-917
390-916
5
ADJUSTMENT
Measure clearance between ejector support roller (7)
and track assembly. Measurement should be 0.032-0.19 in.
7
(0.80-4.8 mm). If measurement is not as specified, adjust
ejector clearance (WP 0027 00).
390-1734
END OF WORK PACKAGE
0039 00-5
