TM 5-3800-205-23-2
EJECTOR GUIDE ROLLER MAINTENANCE - CONTINUED
0038 00
DISASSEMBLY
1.
Remove ejector guide roller (1) and washer (5) from roller shaft (3).
2.
Using bearing cup remover, remove lip seal (6) from ejector guide roller (1). Discard lip seal.
1
5
3
390-910
390-909
6
1
3.
Using a hammer and brass rod, remove plug (7) from ejector guide roller (1).
4.
Using a driver and hydraulic press, remove bearing (8) from ejector guide roller (1).
7
8
1
390-912
390-911
1
ASSEMBLY
1.
Using a driver and hydraulic press, install bearing (8) in ejector guide roller (1) until bearing is seated.
2.
Using a soft-faced hammer, install plug (7) on ejector guide roller (1).
0038 00-2
