TM 5-3800-205-23-2
EJECTOR CARRIER ROLLER MAINTENANCE - CONTINUED
0037 00
DISASSEMBLY - CONTINUED
4
10
9
8 (HIDDEN)
390-815
390-814
2
CLEANING AND INSPECTION
Clean and inspect all parts. Replace worn or damaged parts.
ASSEMBLY
1.
Install key (10) and washer (9) on roller shaft (4).
2.
Using a driver and hydraulic press, install bearing (8) in ejector carrier roller (2) until bearing is seated.
INSTALLATION
1.
Position roller shaft (4) on bracket (6).
2.
Install bolt (7) on bracket (6). Do not tighten bolt (5).
3.
Apply GAA grease to ejector carrier roller (2) and install roller and washer (5) on roller shaft (4).
4.
Install bolt (3) on roller (2).
5.
Adjust ejector carrier roller (Refer to Adjustment).
1
390-810
3
2
0037 00-3
