TM 5-3800-205-23-2
ELEVATOR DRIVE REPLACEMENT - CONTINUED
0036 00
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Elevator drive weighs 750 lb (340 kg).
1.
Position elevator drive (1) on elevator (3) and using soft-faced hammer, install pin (7).
2.
Install washer (6) and bolt (5) on elevator drive (1).
3.
Install bracket (4) on elevator (3) with two bolts (2).
4.
5.
6.
END OF WORK PACKAGE
0036 00-3