TM 5-3800-205-23-2
ELEVATOR ASSEMBLY REPLACEMENT - CONTINUED
0033 00
REMOVAL - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Elevator weighs 1050 lb (475 kg).
10.
Remove elevator (1) from scraper bowl.
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Elevator weighs 1050 lb (475 kg).
1.
Position elevator (1) on scraper bowl and install hanger (10). Repeat step for other side.
2.
Clean and lubricate pin (9). Position hanger (10) on scraper bowl and install pin using a soft-faced hammer. Install bolt
(8) and nut (7) in pin. Repeat step for other side.
NOTE
Bracket weighs 55 lb (25 kg).
3.
Install bracket (4) on scraper bowl with four bolts (6). Remove lifting device and nylon strap from bracket. Repeat step
for other side.
0033 00-3
