TM 5-3800-205-23-2
FLOOR CYLINDER REPLACEMENT - CONTINUED
0032 00
REMOVAL - CONTINUED
5.
Using a hammer and brass rod, remove pin (13) from floor cylinder (1).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Floor cylinder weighs 121 lb (55 kg).
6.
Remove two bolts (14) and bar (15) from floor cylinder (1).
7.
Using a hammer and brass rod, remove pin (16) from floor cylinder (1).
8.
Remove floor cylinder (1) from machine.
NOTE
Note position of fittings to aid in installation.
9.
Remove fittings and O-rings from floor cylinder (1). Discard O-rings.
1
1
14
390-761
390-760
15
13
16
0032 00-3
