TM 5-3800-205-23-2
EJECTOR CYLINDER REPLACEMENT - CONTINUED
0031 00
INSTALLATION - CONTINUED
5.
Install plate (7) on ejector cylinder (3) with three bolts (8). Repeat the procedure for the other side.
6.
Remove protective cap from hose (9). Position hose on ejector cylinder (3) and tighten retaining nut (10).
7.
Install block (6) and bracket (4) on ejector cylinder (3) with two bolts (5).
4
3
5
8
7
3
390-745
390-743
10
9
6
8.
Remove protective cap from tube (1). Position tube on
ejector cylinder (3) and tighten retaining nut (2).
2
1
390-742
3
9.
Connect quick disconnects at right side of draft arms (TM 5-3800-205-10-1).
10.
11.
END OF WORK PACKAGE
0031 00-5