TM 5-3800-205-23-2
EJECTOR CYLINDER REPLACEMENT - CONTINUED
0031 00
REMOVAL - CONTINUED
1.
Loosen retaining nut (2) and disconnect tube (1) from ejector cylinder (3). Install protective cap on tube.
2.
Remove two bolts (5), bracket (4), and block (6) from ejector cylinder (3).
4
3
5
2
1
390-742
390-743
3
6
3.
Attach a suitable lifting device to ejector cylinder (3).
4.
Loosen retaining nut (10) and disconnect hose (9) from ejector cylinder (3). Install protective cap on hose.
5.
Remove three bolts (8) and plate (7) from ejector cylinder (3). Repeat step for other side.
8
7
3
390-745
390-744
3
10
9
0031 00-2
