TM 5-3800-205-23-2
EJECTOR CYLINDER REPLACEMENT - CONTINUED
0031 00
REMOVAL - CONTINUED
6.
Using a hammer and brass rod, remove pin (11) from ejector cylinder (3).
7.
Remove three bolts (13) and plate (12) from ejector (14). Repeat step for other side.
3
12
13
390-746
390-747
11
14
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
15
3
Ejector cylinder weighs 132 lb (60 kg).
8.
Using a hammer and brass rod, remove pin (15) from
ejector cylinder and ejector (3). Remove ejector cylin-
der from machine.
NOTE
Note position of fittings to aid in installa-
tion.
9.
Remove fittings and O-rings from ejector cylinder (3).
Discard O-rings.
390-748
14
0031 00-3