TM 5-3800-205-23-2
EJECTOR CYLINDER REPLACEMENT - CONTINUED
0031 00
INSTALLATION
1.
Lubricate new O-rings with clean hydraulic oil and
15
3
install O-rings and fittings on ejector cylinder (3) in
same position as removed.
2.
Clean and lubricate pin (15). Position ejector cylinder
(3) on machine and install pin using a soft faced ham-
mer.
390-748
14
3.
Install plate (12) on ejector (14) with three bolts (13).
4.
Clean and lubricate pin (11). Using a soft faced hammer, install pin on ejector cylinder (3).
3
12
13
390-746
390-747
11
14
0031 00-4
