TM 5-3800-205-23-2
FLOOR CYLINDER REPLACEMENT - CONTINUED
0032 00
INSTALLATION
1.
Lubricate new O-rings with clean hydraulic oil and install O-rings and fittings on floor cylinder (1) in same position as
removed.
2.
Clean pin (16) and, using soft-faced hammer, install pin (19) on floor cylinder (1).
3.
Install bar (18) on floor cylinder (1) with two bolts (17).
4.
Clean pin (13) and, using soft-faced hammer, install pin on floor cylinder (1).
1
1
14
390-761
390-760
15
13
16
5.
Install plate (11) on floor cylinder (1) with three bolts (12). Repeat step for other side.
6.
Install block (7) on floor cylinder (1) with bracket (9) and two bolts (8).
1
11
12
7
8
1
390-758
390-757
9
0032 00-4
