TM 5-3800-205-23-2
FLOOR CYLINDER REPLACEMENT - CONTINUED
0032 00
INSTALLATION - CONTINUED
7.
Remove protective cap from hose (6). Position hose on floor cylinder (1) and install two half flanges (5) with four bolts
(4).
8.
Remove protective cap from tube (3). Position tube on floor cylinder (1) and tighten retaining nut (2).
1
5
4
1
390-756
390-755
3
6
2
9.
Connect quick disconnects at right side of draft arms (TM 5-3800-205-10-1).
10.
Install toolbox and rear deck cover (WP 0017 00).
11.
Check hydraulic oil level and add oil as required (TM 5-3800-205-23-1, WP 0009 00 and WP 0010 00).
END OF WORK PACKAGE
0032 00-5
