Controls
TM 5-3805-248-14&P-1
Vehicle
Parking /Emergency Brake
Service Brake
Apply - Push the pedal down
Park or Emergency - Pull the
to apply the service brakes.
button to set the parking brake.
The parking brake should be set
any time the operator leaves the
Release - Release the pedal
operator's compartment.
to release the brakes.
Accelerator Pedal
Pull the button to apply the
emergency brake if the service
brakes fall to stop the machine.
The emergency brakes will apply
automatically if air pressure
drops to 280 kPa (40 psi).
Release - Push the button in to
Increase Engine Speed - Push
release the brakes. The air
pressure must be in the normal
down the pedal to increase engine
(GREEN) range. Be sure the
speed.
button stays in, to keep the brakes
released, before moving the machine.
Decrease Engine Speed -
Release the pedal to decrease
engine speed.
Stop Engine - Lift the toe of
the pedal to stopped detent to
stop the engine.
