Before Starting
TM 5-3805-248-l4&P-1
Walk-Around Inspection
For personal safety and maximum compo-
nent service life, it is important that the
following machine areas be inspected.
These areas should be visually inspected
daily, and thoroughly inspected at least
Every 2000 Service Hours or 1 Year.
5.
Hydraulic Tubes and Hoses
Check for worn or frayed hoses, for
loose clamps or mounting bolts, and for oil
leaks.
6.
Differentials and Final Drives
Look on the ground for signs of leakage.
7 . T ransmission
Look on the ground for signs of oil
leakage.
1.
Engine Compartment
Look for oil and fuel leaks and trash
buildup. Repair oil and fuel leaks. Keep the
compartment clean.
2. Rollover Protective Structure (ROPS)
Look for bent, cracked or damaged
structure, and for loose mounting bolts. A
bent, cracked or damaged ROPS should
be replaced.
3.
Operator's Compartment
Look for cleanliness, loose items and
damage. Inspect the seat belt for damage
or wear.
4.
Hitch Component
Look for cracks in castings, worn pin
joints and damaged stops.
