TM 5-3805-248-14&P-1
9.
7. In one quick motion, move the
Move the machine to an open area.
transmission range selector to the highest
Operate all the hydraulic controls, the
desired speed.
brakes, and the steering to check for
proper function. Stop and move the
NOTE: The engine can be started with the
transmission control to reverse to check
transmission in other than NEUTRAL.
the operation of the backup alarm.
However, the machine will not move. Should
this occur, move the transmission range
10. The transmission will shift
selector to NEUTRAL then to the desired
automatically until the highest speed
speed.
selected is reached.
8.
Release the brake pedal and push the
accelerator down.
11.
Use the retarder on downgrades,
when entering turns, fill areas or the cut.
12.
Apply the service brakes to stop the
machine.
Never coast on a down grade. Keep the
transmission engaged.
37
