Operating Adjustments
TM 5-3805-248-14&P-1
Replace or Rotate Cutting Edges
Replace or rotate cutting edges, or router
bits, before the mounting surfaces
become worn.
CAUTION
Do not weld on cutting edges. Welding will re-
duce the service life.
See the "Maintenance" Guide for the
correct maintenance procedures and bolt
For additional wear, the end sections can
be moved from one side to the other.
Each section has two cutting edges.
Rotate the sections 180 for double wear.
Each router bit has two cutting edges.
For double wear, rotate them 180, and
install them on the opposite sides.
