TM 5-3805-248-23-1
SECONDARY FUEL FILTER AND BASE REPLACEMENT - CONTINUED
0037 00
FILTER BASE CLEANING AND INSPECTION - CONTINUED
1.
Remove all gasket material from mounting surfaces.
2.
Clean all parts with solvent.
3.
Dry all parts with compressed air.
4.
Inspect all parts for damage and replace as necessary.
FILTER BASE INSTALLATION
1.
If removed, install new stud (11) in base (12).
2.
Lubricate new preformed packing (3) with clean fuel.
3.
Install new preformed packing (3) and plug (4) in base (12).
4.
Install new gasket (10), cover (9), washers (5 and 8) and bolts (6 and 7).
5.
Install base (12), two washers (13) and bolts (2).
6.
7.
8.
Operate machine and check for fuel system leaks (TM 5-3805-248-10).
END OF WORK PACKAGE
0037 00-5/(-6 blank)