TM 5-3805-248-23-1
ETHER STARTING SWITCH REPLACEMENT - CONTINUED
0062 00
REMOVAL - CONTINUED
3.
Remove screw (5), knob (6) and nut (7).
6
7
5
4.
Remove switch (4) from instrument panel (8).
4
8
394-206
INSTALLATION
1.
Position switch (4) in instrument panel (8).
2.
Install nut (7).
3.
Install knob (6) and screw (5).
4.
Connect two wire connectors (3).
5.
Install two new lockwashers (2) and screws (1).
1,2,3
4
394-205
6.
Install upper front access plates (WP 0192 00).
7.
Connect battery cables (WP 0104 00).
8.
Verify correct operation of starting aid (TM-5-3805-248-10).
END OF WORK PACKAGE
0062 00-2
