TM 5-3805-248-23-1
BATTERY CABLES REPLACEMENT - CONTINUED
0104 00
INSTALLATION
1.
Install battery cable (2), washer (59) and nut (60) on disconnect switch. Torque to 61 lb-in (83 Nm).
2.
Install battery cable (4), washer (58) and nut (57) on starting motor solenoid post under operator compartment on left
side of machine.
3.
Install clamp (53) on battery cables (2 and 4).
4.
Install spacer (54), clamp (53), two washers (52), washer (55) and bolt (56) on frame.
5.
Install clamp (51) on battery cables (2 and 4).
6.
Install spacer (50), clamp (51), two washers (49), washer (48) and bolt (47) on frame.
51 49
48 49 50
47
2
4
56 55
52
52 54 53
394-1688
7.
Install plate (39), washer (40) and bolt (41).
2
8.
Install clamp (43) on battery cables (2 and 4).
9.
Install spacer (44), clamp (43), two washers (42),
washer (45) and bolt (46) on frame.
39
40
41
42
4
43
44
45 42
46
394-116
0104 00-7
