TM 5-3805-248-23-1
SHIFT CONTROL LEVER AND HOUSING MAINTENANCE - CONTINUED
0126 00
ASSEMBLY - CONTINUED
17. Install shaft (13), two washers (9), woodruff key (14), key (7) and lever (12).
18. Install bolt (15), washer (11) and nut (10) on lever (12).
19. Install new gasket (6), housing (5), four washers (4) and bolts (3) in rear of transmission shift control housing (8).
5
3
6
4
7
9
15
9
14
8
10
12
11
13
394-1692
INSTALLATION
1.
Install shift control lever housing assembly.
2.
Install six washers (1) and bolts (2).
3.
Install and adjust transmission shift control cable (WP 0125 00).
4.
Operate machine and verify correct operation of shift control lever (TM 5-3805-248-10).
1
2
SHIFT CONTROL
LEVER HOUSING
394-247
END OF WORK PACKAGE
0126 00-6
