TM 5-3805-248-23-1
TRACTOR AIR TANKS AND LINES AND FITTINGS REPLACEMENT - CONTINUED
0153 00
REMOVAL - CONTINUED
2.
Disconnect three hose assemblies (4) from front of two tractor air tanks (9).
4
5,6,7 (HIDDEN)
8
CLAMP
9
10
9
394-289
3
15
16
11
10
14
11
12,13
12,13
NOTE
Perform steps 3 through 8 only if fittings must be replaced. Otherwise, proceed to step 10.
3.
If necessary, remove pipe reducer (16) from front of air tank (9).
4.
If necessary, remove elbow (15) from front of air tank (9).
5.
If necessary, remove check valve (14) from front of air tank (9).
6.
If necessary, remove safety relief valve (8) from front of air tank (9).
7.
If necessary, remove two elbows (10 and 11) from front of two air tanks (9).
8.
If necessary, remove two valves (12) and valve bodies (13) from front of two air tanks (9).
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Keep clear of heavy parts supported only by lifting device. Failure to follow this warning may cause injury
or death.
NOTE
Air tanks and access cover as an assembly weighs 90 lb (40 kg).
9.
With assistance, remove cover (3) and tanks (9) as an assembly from the machine.
10.
Remove two bolts (5), nuts (6), washers (7) and two clamps.
0153 00-3