TM 5-3805-248-23-1
DIFFERENTIAL LOCK CONTROL VALVE ASSEMBLY MAINTENANCE - CONTINUED
0173 00
ADJUSTMENT
1.
Turn bolt (4) until pedal (3) is parallel with floor without moving plunger (11).
2.
Turn bolt (4) until distance (A) is 0.16 in. (4.0 mm.). Repeat steps 1 and 2 until proper dimension is obtained.
3.
Tighten nut (5)
4.
Adjust bolt (25) to 0.75 in. as shown.
4
3
11
A
5
0.75 IN.
0.16 IN.
25
5.
Install brake control valve (WP 0145 00).
6.
Install step assembly (WP 0191 00).
7.
Operate machine and verify proper operation (TM 5-3805-248-10).
END OF WORK PACKAGE
0173 00-7/(-8 blank)
