TM 5-3805-248-23-1
WINDSHIELD WIPER ASSEMBLY REPLACEMENT - CONTINUED
0217 00
REMOVAL - CONTINUED
7.
Remove drive adapter (18), cap (17), nut (16), washer
(15) and gasket (14) from driveshaft assembly (11).
12
Discard gasket.
13
8.
Remove two capscrews (19) and lockwashers (20).
Discard lockwashers.
9.
Remove pivot assembly (13) and gasket (12) from
11
driveshaft assembly (11). Discard gasket.
14 15
16
17
18
20
19
394-392
NOTE
Mark location of connecting link and crank prior to removal to ensure correct installation.
10.
Remove connecting link (27) from crank (24) and
21
2
driveshaft assembly (11) from inside of operator com-
partment.
22
11.
Remove nut (26) and spring tension washer (25) from
23
crank (24).
24
25
12.
Remove crank (24) from motor assembly (2).
26
13.
Remove four screws (28) from driveshaft assembly
(11).
14.
Remove driveshaft assembly (11) from bracket (21).
27
28
15.
Remove three bolts (23) and washers (22) from motor
394-393
11
assembly (2).
16.
Remove motor assembly (2) from bracket (21).
0217 00-3
