TM 5-3805-248-23-1
WINDSHIELD WIPER ASSEMBLY REPLACEMENT - CONTINUED
0217 00
INSTALLATION - CONTINUED
NOTE
Align arm assembly with mark made during removal to ensure correct installation.
12.
Install arm assembly (6) on outside of operator compartment.
13.
Install new lockwasher (4) and nuts (5 and 3). Torque nut (3) to 144 lb-in. (16 Nm).
3,4
5
6
394-390
14.
Connect three wire assemblies (1) at terminals to motor assembly (2) on inside of operator compartment.
1
2
394-389
15.
Operate windshield wiper and verify correct operation (TM 5-3805-248-10).
END OF WORK PACKAGE
0217 00-6
