TM 5-3805-248-23-1
AIR HORN SOLENOID AND HOSE ASSEMBLY REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Maintenance Level
Materials/Parts - Continued
Unit
Tag, marker (Item 42, WP 0339 00)
Tools and Special Tools
Tape, anti-seizing (Item 43, WP 0339 00)
Tool kit, general mechanic's (Item 113, WP 0338
Equipment Condition
Upper front access plates removed (WP 0192 00)
Materials/Parts
Cap set, protective (Item 6, WP 0339 00)
Air horn hose assembly disconnected from air horn
Rag, wiping (Item 35, WP 0339 00)
REMOVAL
CAUTION
Wipe area clean around all connections to be opened during removal. Cap hoses and plug openings after dis-
connecting. Contamination of air system could result in premature failure.
NOTE
Tag wire assemblies prior to removal to ensure correct installation.
Only remove fittings if damaged.
1.
Disconnect two wire connectors (3) from solenoid valve (4) on front of operator compartment.
2.
Remove hose assembly (1) from elbow (2).
3.
Remove elbow (2) from solenoid valve (4).
4.
Remove solenoid valve (4) from nipple (5).
5.
If damaged, remove nipple (5).
2
1
3
4
5
394-398
