TM 5-3805-248-23-1
DRAFT FRAME HOSES, LINES AND FITTINGS REPLACEMENT - CONTINUED
0236 00
REMOVAL - CONTINUED
NOTE
Use a container to capture draining hydraulic oil. Dispose of hydraulic oil IAW local policy and ordi-
nances. Ensure all spills are cleaned up.
Tag hose and tube assemblies prior to removal to ensure correct installation.
Note routing of all hose assemblies prior to removal to ensure correct installation.
1.
Disconnect hitch to draft frame intermediate hoses (WP 0235 00).
2.
Remove six capscrews (1) and three spacers (3) from draft frame.
3.
Remove six clamp halves (4) and sleeves (2) from tube assemblies (9, 10 and 11).
4.
Remove four capscrews (5), washers (6) and two clamps (7 and 8).
1,2
3,4
5,6
7
5,6
394-547
10 9 8
11
5.
Remove four capscrews (20), washers (21) and two flange halves (18) from tube assembly (9).
6.
Remove four capscrews (24), two spacers (25) and clamp halves (22).
7.
Remove four sleeves (23), tube assembly (9) and preformed packing (19). Discard preformed packing.
8.
Remove four capscrews (12), two nuts (13), and retaining strap (26) from draft frame.
9.
Remove four capscrews (27), washers (28) and two flange halves (29) from tube assembly (10).
10.
Remove tube assembly (10) and preformed packing (30). Discard preformed packing.
11.
Remove four capscrews (14), washers (15), and two flange halves (16) from tube assembly (11).
12.
Remove tube assembly (11) and preformed packing (17) from draft frame. Discard preformed packing.
0236 00-2
