TM 5-3805-248-23-2
ENGINE ASSEMBLY REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Personnel Required
Maintenance Level
Direct Support
Three
Tools and Special Tools
Equipment Condition
Tool kit, general mechanic's (Item 113, WP 0338
Air pressure vented (TM 5-3805-248-10)
Crankcase oil drained (WP 0022 00)
Shop equipment, automotive maintenance (Item
103, WP 0338 00)
Oil filter removed (WP 0022 00)
Lifting device, 4,000 lb minimum capacity
Air cleaner removed (WP 0031 00)
Materials/Parts
Fuel lines removed (WP 0035 000)
Cap set, protective (Item 6, WP 0339 00)
Muffler and piping removed (WP 0041 00)
Cleaning compound, solvent (Item 8, WP 0339 00)
Radiator and support assembly removed (WP 0044
Detergent (Item 13, WP 0339 00)
00)
Oil, lubricating (Item 32, WP 0339 00)
Temperature by-pass removed (WP 0136 00)
Rag, wiping (Item 35, WP 0339 00)
Engine compartment shields removed (WP 0191
Tag, marker (Item 42, WP 0339 00)
00)
Packing, preformed (2)
Crankcase guards removed (WP 0201 00)
Seal
Retarder control valve assembly removed (WP
References
Driveshaft removed (WP 0293 00)
WP 0113 00
REMOVAL
NOTE
Tag wiring harnesses prior to removal to ensure correct installation.
1.
Remove alternator ground wire connector (WP 0113 00).
CAUTION
Wipe area clean around all connections prior to removal. Cap coolant hoses and plug openings after
removal. Contamination of coolant system could result in premature failure.
