TM 5-3805-248-23-2
FLYWHEEL HOUSING REPLACEMENT - CONTINUED
0262 00
INSTALLATION - CONTINUED
22.
Tighten 19 bolts (3, 4, 7 and 8).
3
8
4
7
394-636
R
23.
Torque bolts (A through I) sequentially to 100 lb-ft
S
Q
O
(136 Nm).
P
N
D
24.
Torque bolts (J through S) sequentially to 40 lb-ft (54
J
Nm).
L
K
25.
Torque bolts (A through I) sequentially to 100 lb-ft
(136 Nm).
M
A
B
26.
Torque bolts (J through S) sequentially to 40 lb-ft (54
E
Nm).
C
F
NOTE
G
I
H
Do not use finger or towel to remove
394-637
excess silicone sealant. Use flat straight
edge tool, such as a putty knife.
27.
Using flat straight edge tool, remove excess silicone sealant.
28.
Remove lifting device.
29.
Install new rear crankshaft seal (WP 0345 00).
30.
Install flywheel (WP 0261 00).
31.
Install oil pan (WP 0268 00).
32.
Install starting motor (WP 0057 00).
END OF WORK PACKAGE
0262 00-6
