TM 5-3805-248-23-2
FLYWHEEL HOUSING REPLACEMENT - CONTINUED
0262 00
INSTALLATION - CONTINUED
12.
Install two studs (1).
7
13.
Install four washers (2) and bolts (3).
6
14.
Install washer (9) and bolt (8).
8
15.
Install five washers (6) and bolts (7).
16.
Install nine washers (5) and bolts (4).
9
3
24
17.
Apply bead of silicone sealant to bottom left and right
2
13
edges of flywheel housing (24) mating surface.
18.
Install new gasket (13) on bolts (3, 4, 7 and 8).
1
19.
Inspect gasket (13) for correct position.
20.
Apply another bead of silicone sealant to bottom left
and right edges of new gasket surface.
4
5
394-635
21.
Use lifting device to position flywheel housing assem-
HOIST AND
bly (24) on engine.
SLING
ENGINE
BLOCK
FLYWHEEL
HOUSING
ASSEMBLY
394-630
0262 00-5
