TM 5-3805-248-23-2
GOVERNOR CONTROL MAINTENANCE - CONTINUED
0280 00
REMOVAL
WARNING
Eye protection must be worn when performing maintenance where components or particles could fly
out during procedure. Failure to follow this instruction may cause injury.
Some components are under spring tension. Wear eye protection and use extreme caution when disas-
sembling them to avoid injury.
1.
Press lever (13) on left side of engine to relieve ten-
GOVERNOR
sion on spring (12).
SHAFT
2.
Remove spring (12), nut (1) and bolt (11) from lever
(4).
3.
Remove nut (2), washer (3) and bolt (5) from lever
(4).
4.
Remove bolt (7), washer (8) and spacer (9) from lever
(4).
1
2
2
12
11
13
10
3
4
9
8
7
5
6
394-709
0280 00-2
