TM 5-3805-248-23-2
GOVERNOR CONTROL MAINTENANCE - CONTINUED
0280 00
REMOVAL - CONTINUED
NOTE
Tag wire connectors, cable and harness assemblies before disconnecting to ensure correct installation.
5.
Disconnect cable (10) from lever (4).
6.
Separate spring link (6) assembly from lever (4).
7.
Mark lever (4) and governor shaft to aid in installation.
8.
Remove lever (4) from governor shaft.
9.
Press lever (13) on left side of engine to relieve ten-
6
sion on spring (12).
14
15
13
394-710
10.
Remove nut (20), bolt (16), rod end bearings (17) and
6
(19) and nut (18) from spring link (6).
16
18
17
19
20
394-711
0280 00-3
