TM 5-3805-248-23-2
GOVERNOR CONTROL MAINTENANCE - CONTINUED
0280 00
REMOVAL - CONTINUED
17.
Use brass rod and hammer to remove bearing (31)
from bracket (30).
31
30
394-714
18.
Remove bolt (33) from pedal (34).
35
33
34
27
19.
Remove setscrew (35) and washer (36) from collar
36
32
(37).
20.
Remove pedal (34) from machine.
21.
Remove key (32) from shaft (27).
37
22.
Remove shaft (27) from machine.
23.
Remove collar (37) from machine.
394-715
24.
With assistance, support bracket (38) and remove two bolts (41) and washers (40) from operator compartment floor.
25.
Remove bracket (38) assembly from engine compart-
38
ment.
26.
Remove and discard gasket (39). Remove all gasket
39
material from mounting surfaces.
40
41
394-716
0280 00-5
