TM 5-3805-248-23-2
GOVERNOR CONTROL MAINTENANCE - CONTINUED
0280 00
INSTALLATION - CONTINUED
7.
Use clean oil to lubricate bearing (42).
8.
Use a brass rod and hammer to install bearing (42) in
bracket (38).
42
38
394-717
9.
Position collar (37) on plate (48).
10.
Install shaft (27) through support on plate (48) and collar (37).
11.
Install key (32) in shaft (27).
35
33
34
27
12.
Install pedal (34) on operator compartment floor.
36
32
13.
Install washer (36) and setscrew (35) in collar (37).
14.
Install bolt (33) in pedal (34).
37
48
394-715
15.
Use clean oil to lubricate bearing (31).
16.
Use a brass rod and hammer to install bearing (31) in
bracket (30).
31
30
394-714
0280 00-8