TM 5-3805-248-23-2
DRIVESHAFT REPLACEMENT - CONTINUED
0293 00
REMOVAL - CONTINUED
4.
Install 3/4-16NC eyebolt (10) in one of three holes in driveshaft (9).
5.
Pull driveshaft (9) by 3/4-16NC eyebolt (10) until 2 ft (0.6 m) of driveshaft extends from transmission (3).
3
9
394-778
10
6.
Disconnect hose assembly (11) from machine, forward
11
of flywheel housing (1).
1
7.
Loosen two clamps (16) on hose (12).
8.
Place pry bar between pry tabs (13) on tube (14) and
flywheel housing (1) and remove tube (14) assembly.
9.
Remove two clamps (16), hose (12) and O-ring (15)
from tube (14). Discard O-ring.
12
13
14
15
16 13
394-779
0293 00-3
