TM 5-3805-248-23-2
DIFFERENTIAL FILLER REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Materials/Parts - Continued
Maintenance Level
Oil, lubricating (Item 30, WP 0339 00)
Direct Support
Rag, wiping (Item 35, WP 0339 00)
Tools and Special Tools
Gasket
Tool kit, general mechanic's (Item 113, WP 0338
Seal (2)
Shop equipment, automotive maintenance and
References
repair (Item 103, WP 0338 00)
TM 5-3805-248-10
Materials/Parts
Equipment Condition
Cap set, protective (Item 6, WP 0339 00)
Final drive oil drained to level below sight gage
Cleaning compound, solvent (Item 8, WP 0339 00)
(WP 0144 00)
REMOVAL
1.
Remove padlock (4) if equipped.
2.
Disconnect plate (5) and let hang by cable.
CAUTION
Wipe area clean around all connections to be opened during removal and disassembly. Cap lines and plug
openings after removing lines. Contamination of hydraulic system could result in premature failure.
NOTE
2
Use container to capture any oil which
3
1
may drain from lines. Dispose of oil IAW
local policy and ordinances. Ensure all
spills are cleaned up.
3.
Disconnect hose assembly (1) from elbow (12).
4.
Remove cap (2) and seal (3) from elbow (12). Discard
seal.
12
NOTE
4
If equipped with round sight glass, pro-
ceed to step 6. Do not attempt to disassem-
11
ble sight gage.
5.
Remove two bolts (8), washers (9), retainer (10), seal
10
(11), lens (7) and plate (6). Discard seal.
CABLE
7 6
9
394-908
8
5
