TM 5-3805-248-23-2
SCRAPER WHEEL AND TIRE REPLACEMENT - CONTINUED
0303 00
INSTALLATION - CONTINUED
NOTE
Use seal installer to ensure seal is properly seated on bottom of seal ring ramp and against retaining lip.
Ensure ring of seal is not twisted and seal is clean and dry.
3.
Use installer tool to install new seal (14) in retainer
INSTALLER
(15).
14,15
TOOL
4.
Install spacer (16) on rear axle housing.
16
13
5.
Lubricate bearing (13) with gear lubricant and heat at
275F (135C) for 30 minutes.
6.
Install bearing (13) on rear axle housing.
0303 00-7
