TM 5-3805-248-23-2
SCRAPER WHEEL AND TIRE REPLACEMENT - CONTINUED
0303 00
WARNING
Lifting of the machine for wheel and tire assembly service is a step-by-step procedure. Failure to follow this
procedure may cause injury.
NOTE
The following replacement procedure is for the front-right wheel and tire assembly. The replacement proce-
dure for the tractor front-left tire and wheel assembly is identical.
REMOVAL
1.
Position wheel blocks under front and rear of wheel and tire assemblies not being removed.
WARNING
Ensure machine will not roll or shift before jacking it or placing it on jack stands. Use chock blocks to pre-
vent machine from rolling. Failure to follow this procedure may cause injury or death due to machine turn-
ing or slipping off jacks or jack stands.
2.
Position lifting device under frame at right scraper
JACK STAND
wheel.
3.
Lift machine until tire is off ground.
4.
Position jack stand under scraper.
5.
Lower machine slowly onto jack stand, making sure
machine is safely supported.
394-427
LIFTING DEVICE
0303 00-2
