TM 5-3805-248-23-2
TRACTOR WHEEL AND TIRE MAINTENANCE - CONTINUED
0302 00
INSTALLATION - CONTINUED
12.
Install ring (2) and three bolts (1), one in every third hole.
13.
Torque three bolts (1) to 25 lb-ft (34 Nm). Torque three bolts (1) again to 50 lb-ft (68 Nm).
14.
Install depth micrometer in threaded bolt holes in ring (2).
15.
Measure average depth to end of axle housing.
16.
Position outside micrometer on ring (2). Measure average thickness of ring (2) at threaded bolt holes.
NOTE
Measured gap is the difference between the average depth measurement and average thickness of ring.
17.
Remove three bolts (1) and ring (2).
1
2
394-426
18.
Install shim(s) (3).
2,3
19.
Adjust measured gap to 0.012 in. (0.3 mm) more than
the measured gap. Add or remove shim(s) (3) to
adjust.
20.
Install ring (2) and six bolts (1). Torque bolts to 100
1
lb-ft (136 Nm).
21.
Install lock wire.
394-419
LOCK WIRE
0302 00-8
