TM 5-3805-248-23-2
SCRAPER WHEEL AND TIRE REPLACEMENT - CONTINUED
0303 00
REMOVAL - CONTINUED
NOTE
Use a container to capture draining oil. Dispose of oil IAW local policy and ordinances. Ensure all spills are
cleaned up.
6.
Remove fill plug.
7.
Place container under scraper wheel.
8.
Loosen eight bolts (1) a small amount. Do not remove nuts. Pull cap (3) away from the wheel to drain the oil from the
wheel assembly.
9.
Remove eight bolts (1), washers (2) and cap (3).
10.
Remove and discard preformed packing (4).
3
1,2
4
FILL
3
PLUG
394-428
0303 00-3
