TM 5-3805-248-23-2
TIRE REPLACEMENT - CONTINUED
0305 00
INSTALLATION
CAUTION
DO NOT damage the preformed packing during this process. If damage occurs at any point during the pro-
cess, a new preformed packing must be installed.
1.
Lubricate inner edges of tire (5) beads and preformed packing (4) with soapy water.
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during this procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may result in injury or death.
NOTE
Weight of tire is 950 lb (635 kg).
2.
Use lifting device and straps to position tire (5) on rim. Push tire against inner bead surface of rim.
3.
Push in on outer surface of tire (5) and install flange (1), new preformed packing (4), lockring (3) and lock tab (2).
4.
Wrap bead constrictor around the CENTER of the tire (5).
5.
Compress tire (5) until the tire beads reach both bead contact surfaces.
3,4
2
(HIDDEN)
1
5
2
RIM
1
4
5
394-1703
394-1730
1
6
3
0305 00-4
