TM 5-3805-248-23-2
SUPPLEMENTAL STEERING PUMP REPLACEMENT - CONTINUED
0307 00
REMOVAL
CAUTION
Wipe area clean around all connections prior to removal. Cap lines and plug openings after removal. Con-
tamination of system could result in premature failure.
NOTE
Use a container to capture draining oil. Dispose of oil IAW local policy and ordinances. Ensure all spills
are cleaned up.
Tag hose and tube assemblies prior to removal to ensure correct installation.
Note routing of all hose assemblies prior to removal to ensure correct installation.
Remove and note location of all clips that secure hose assemblies to ensure correct installation.
1.
Disconnect hose assembly (1) from sump screen housing and move to side of supplemental steering pump assembly (2).
2.
Remove four bolts (4), washers (5) and two flange halves (6) from hose assembly (3) and tube assembly (8).
3.
Disconnect hose assembly (3).
4.
Remove and discard preformed packing (7).
5.
Remove four bolts (10), washers (11), two flange halves (9) and tube assembly (8).
6.
Remove and discard preformed packing (12).
SUMP SCREEN
HOUSING
1
12
11
2
10
3
9
4
5
394-917
7
8
6
0307 00-2
