TM 5-3805-248-23-2
SEAT SUSPENSION ASSEMBLY REPAIR - CONTINUED
0317 00
DISASSEMBLY - CONTINUED
CAUTION
Wipe area clean around all connections to be opened during removal and disassembly. Cap lines and plug
openings after removing lines. Contamination of air system could result in premature failure.
NOTE
Tag all lines prior to removal to ensure correct installation.
Use container to catch any draining oil. Dispose of oil IAW local policy and ordinances. Ensure all
spills are cleaned up.
22.
Disconnect hose assembly (62) from elbow (63).
54
23.
Remove elbow (63) from valve assembly (56).
55
64
63
24.
Remove and discard O-ring (64) from elbow (63).
56
25.
Remove hose assembly (62) from cylinder (6).
62
26.
Remove tube assembly (53) and two elbows (52) from
52
actuator (60) and valve assembly (56).
51
27.
Remove and discard two O-rings (51) from elbows
57
(52 and 63).
61
28.
Remove nut (59), lockwasher (58), bolt (54) and
53
clamp (55) from suspension frame (17).
29.
Loosen clamp (57) and slide onto accumulator (61).
60
58
6
59
17
394-1032
0317 00-5
