TM 5-3805-248-23-2
CYLINDER BLOCK REPAIR - CONTINUED
0342 00
ASSEMBLY
CAUTION
Both surfaces of plate, top of cylinder block and both sides of gasket must be clean and dry when installed.
Do not use gasket adhesives or other substances on these surfaces, or leaks may occur.
NOTE
Repeat steps 1 through 14 until liner specifications have been achieved.
1.
Use dowel driver and hammer to install two dowels (1
1
2
and 2) in cylinder block.
2.
Install cylinder liner (39) in cylinder block.
3.
Install new gasket (41) and plate (40) on cylinder
1
block. Measure and record projection of cylinder liner
40
(39). Refer to Inspection, steps 6 through 18.
41
39
394-1119
0342 00-10
