TM 5-3805-248-23-2
CYLINDER BLOCK REPAIR - CONTINUED
0342 00
ASSEMBLY - CONTINUED
39
12.
Install inserts in positions where projection heights are
within specifications. If liner projection specifications
cannot be met, spacer plate (40) and gasket (41) must
be removed and their thickness measured. Replace, if
inspection indicates it is necessary. Cylinder liner
flange thickness must also be measured and cylinder
40
liners replaced, if necessary.
13.
Remove plate (40), gasket (41) and cylinder liner (39)
from cylinder block.
14.
Measure thickness of plate (40), gasket (41) and cylin-
der liner and compare with chart below. Replace, if
necessary.
41
394-1121
0342 00-12
