TM 5-3805-248-23-2
TURBOCHARGER REPAIR - CONTINUED
0356 00
ASSEMBLY - CONTINUED
13.
Use snap ring pliers to install new ring (14) on shaft
11
and wheel assembly (6).
14.
Install two new rings (11) on spacer (10).
10
14
6
394-1241
15.
Position shroud (13) against housing (12).
CAUTION
Use care not to scratch or scuff bearings and rings in housing when installing shaft and wheel assembly. Fail-
ure to follow this procedure could cause damage to equipment.
16.
Install shaft and wheel assembly (6) through shroud
10,11
(13) and housing assembly (12).
17.
Install spacer (10) over shaft and wheel assembly (6).
Ensure the small inside diameter of spacer is toward
the impeller (7) end of shaft and wheel assembly.
12
6
13
7
394-1246
6
394-1240
0356 00-9
