TM 5-3805-248-23-2
TURBOCHARGER REPAIR - CONTINUED
0356 00
ASSEMBLY - CONTINUED
34.
Position clamp (4) on compressor housing (1).
35.
Install housing (1) on turbocharger assembly and align match-marks.
CAUTION
To ensure correct housing and clamp installation, lightly tap all around clamp. If clamp assembly comes
loose, housing may impact impeller and cause damage to machine.
36.
Install nut (5) on clamp (4). Torque nut to 10 lb-ft (14
Nm).
1
37.
Use a soft hammer to tap all around clamp (4) and
lightly torque again to 10 lb-ft (14 Nm).
4
38.
Repeat step 37 until nut (5) does not turn when speci-
fied torque is applied.
2
5
394-1236
39.
Cover all open ports of turbocharger assembly to prevent contamination until it is installed on machine.
40.
Install turbocharger (WP 0276 00).
END OF WORK PACKAGE
0356 00-12
