TM 5-3805-248-23-2
ALTERNATOR (DELCO) REPAIR - CONTINUED
0358 00
DISASSEMBLY - CONTINUED
NOTE
Inspection of stator is necessary before proceeding with further disassembly. Replace any parts if cracked,
broken, corroded or deteriorated.
33.
Inspect three terminals (75).
34.
Inspect grommet (74) and insulator (73).
35.
Remove three terminals (75), grommet (74) and insulator (73) from stator (1).
36.
Remove three screws (78).
37.
Separate grommet (77) and field coil (41). Do not damage grommet.
38.
Use driver and hammer to remove and discard plug. Drive plug out from inside of housing (2).
39.
Use driver and press to remove and discard bearing. Press out bearing from inside of housing (2).
CAUTION
Removal of bushing from housing will cause destruction of bushing. Remove only if inspection indicates
removal is necessary.
40.
Inspect bushing (76).
2
72
31
41.
Use driver and press to remove bushing (76), if neces-
sary.
42.
Do not remove three negative diodes (31).
79
73
78
1
74
76 75
41
77
394-1353
0358 00-8
