TM 5-3805-248-23-2
ALTERNATOR (DELCO) REPAIR - CONTINUED
0358 00
ASSEMBLY - CONTINUED
29.
Loosely install new gasket (43), stud (44), new gasket
45
(42), washer (46), new lockwashers (47 and 46), nut
(48) and stud (45).
44
30.
Install heat sink (49) assembly in stator (1).
43
31.
Loosely install three insulators (50), washers (51),
new lockwashers (52) and screws (53).
42
32.
Tighten nut (48). Stud (44) must be properly seated.
33.
Tighten three screws (53).
53
46
47
52
48
51 50
394-1197
49
34.
Position regulator (28).
35.
Install washer (36), new lockwashers (35 and 37), screw (34) and insulator (40).
36.
Position two field coil wires (41) on regulator (28).
37.
Install lockwasher (39) and screw (38).
38.
Install lockwasher (33) and nut (32).
35 36 37
34
33
38 39
32
41
28
40
394-1196
0358 00-13
