TM 5-3805-248-23-2
PRESSURE AND SELECTOR VALVE ASSEMBLY REPLACEMENT - CONTINUED
0364 00
REMOVAL - CONTINUED
4.
Loosen bolt (19) and nut (18).
7
5.
Disconnect lever assembly (7) from shaft (14).
10
9
19
6.
Remove three bolts (9) and washers (8).
11
8
7.
Disconnect housing assembly (17) from transmission
case and position out of the way.
12
8.
Remove and discard gasket (16).
9.
Remove woodruff key (15).
18
10.
Remove four bolts (10), washers (11), cover (12) and
13
gasket (13). Discard gasket.
17
16
15
14
TRANSMISSION CASE
11.
Remove plug (27), preformed packing (28), sleeve
20
(29) and preformed packing (30). Discard preformed
21
packings.
NOTE
22
Tag hose and tube assemblies prior to
23
26
removal to ensure correct installation.
24
12.
Disconnect hose assembly (26).
25
27
13.
Remove union (31).
28
14.
Remove 12 bolts (23) and lockwashers (24). Discard
29
31
lockwashers.
30
15.
Disconnect seven clips (25) and position out of the
way. Do not remove seven clips from wiring harness.
16.
Remove nine bolts (20) and lockwashers (21). Discard
lockwashers.
17.
Disconnect two clips (22) and position out of the way.
Do not remove two clips from wiring harness.
394-384
0364 00-3
