TM 5-3805-248-23-2
STARTING MOTOR SOLENOID (PRESTOLITE) REPAIR - CONTINUED
0363 00
ASSEMBLY - CONTINUED
8.
Install new gasket (12) in cover (1).
9.
Install new insulator (13) in cover (1).
10. Install new terminal (5) on one of two new studs (14).
NOTE
Stud with terminal is to be installed in left mounting hole of cover.
11.
Install two new studs (14) through new insulator (13) and cover (1).
12.
Using insulating varnish, coat two new spacers (11), new washers (10), new lockwashers (9), new washers (8) and new
nuts (7) and install on two new studs (14).
14
13
12
1
11
10
89
7
394-1396
13.
Position cover (6) assembly over housing (2).
14.
Connect wire assembly (3) on terminal (5).
15.
Install screw (4) on terminal (5).
16.
Install four nuts (6).
20
2
1
3
5
4
6
394-1395
17.
Install starter solenoid (WP 0360 00).
18.
Start engine and verify correct operation of starting system (TM 5-3805-248-10).
END OF WORK PACKAGE
0363 00-9/-10 Blank
